2/7/2018
Topic:
Blox sending Options to Private IP
bloxsupport1
|
it happens while in call or idle ? |
2/8/2018
Topic:
Blox sending Options to Private IP
bloxsupport1
|
Can you send us the config back to our support email: support@blox.org |
2/8/2018
Topic:
Blox Features
bloxsupport1
|
dariusz wrote:
Does blox support call transfer (refer message to transfer an active call to another number)?
yes |
2/8/2018
Topic:
How to install Freeblox with ZERO Linux knowledge?
bloxsupport1
|
can you please send us output of following command
$ rpm -qa | grep blox |
2/8/2018
Topic:
Unable to upgrade to 1.0.6-19
bloxsupport1
|
> To upgrade just follow simple steps
1. download the upgrade from http://blox.org/downloads
Existing user can download updates here Blox 1.0.6-19 : Download
2. After upgrading you can download and install freeblox GUI To download freeblox just follow the link in download
FreeBlox GUI can be downloaded here |
2/8/2018
Topic:
How to install Freeblox with ZERO Linux knowledge?
bloxsupport1
|
> To upgrade just follow simple steps
1. download the upgrade from http://blox.org/downloads
Existing user can download updates here Blox 1.0.6-19 : Download
2. After upgrading you can download and install freeblox GUI To download freeblox just follow the link in download
FreeBlox GUI can be downloaded here |
2/8/2018
Topic:
How to install Freeblox with ZERO Linux knowledge?
bloxsupport1
|
can you please send us output of following command, again
$ rpm -qa | grep blox |
2/9/2018
Topic:
How to install Freeblox with ZERO Linux knowledge?
bloxsupport1
|
Hello Chris, seems like the upgrade has been failed, you can write email to support@blox.org with upgrade screenshot and config backup (Tools->Administration) |
2/11/2018
Topic:
ShoreTel Dropping Call After 30-40 seconds
bloxsupport1
|
@wreckroot: can you upgrade to recent version and try again You can download upgrade package from https://blox.org/downloads
Existing user can download updates here Blox 1.0.6-19 : Download (File Size: 7.62MB) |
2/12/2018
Topic:
Unable to upgrade to 1.0.6-19
bloxsupport1
|
Hi, Thanks for your feedback, Can you paste out of following commands ?
$ cat /var/tmp/.fw_upgrade.log $ cat /var/tmp/.firmware_upg
after upgrade attempt reboot via GUI edited by bloxsupport1 on 2/12/2018 |
2/13/2018
Topic:
How to install Freeblox with ZERO Linux knowledge?
bloxsupport1
|
Try with the command from your host PC "scp -r filename root@ipaddress(blox server):/root and follow the instruction to install the freeblox from the manual.
vignesh.g@tele-apps.com wrote:
Guys, can some one tell the how to push the FreeBlox rpm file to the server.... what is the default admin credential
Vignesh |
2/13/2018
Topic:
ShoreTel Dropping Call After 30-40 seconds
bloxsupport1
|
Please mail us the backup config of Blox, Tools-->Administration, click on Config Backup.
Send it to support@blox.org
Thanks and Regards Blox Support Team
wreckroot wrote:
bloxsupport1 wrote:
@wreckroot: can you upgrade to recent version and try again
Upgrade to the latest version but same results.
blox_core-1.0.6-19.x86_64 blox_opensips-1.0.6-19.x86_64 blox_rtppinhole-1.0.6-19.x86_64 blox_ministun_client-1.0.6-19.x86_64 blox_security-1.0.6-19.x86_64 freeblox-1.0.6-19.x86_64 blox-rpm-keys-1.0.6-19.x86_64 blox_rtpengine-1.0.6-19.x86_64
I had the internal SIP domain using the IP of the Shoretel and the external SIP domain using my public address. I then changed the internal SIP domain to use the inside IP of the SBC, but no change. edited by wreckroot on 2/12/2018 |
2/14/2018
Topic:
detail configuration
bloxsupport1
|
Hi, You can refer the user manual and configuration guide to configure. Below is the link to download the manuals, https://drive.google.com/open?id=0B5hujoHXcrfGbkIzdmJudHVOU1E
Thanks and Regards Blox Support Team.
vignesh.g@tele-apps.com wrote:
hi everyone, can anyone share me on the detailed configuration of Blox SBC, ... I am trying to integrate blox sbc with freeswitch for inbound/outbound calling and remote phone registration.... |
2/23/2018
Topic:
Block based on UserAgent and Extn number
bloxsupport1
|
You can add useragent to the file /etc/blox/sipua.cfg to block (apply changes required) For extns, you need to configure SIP header manipuation |
2/25/2018
Topic:
Block based on UserAgent and Extn number
bloxsupport1
|
after updating sipua.cfg (allow list)
In file /etc/blox/blox.cfg.m4
if ($ua && pcre_match_group("$ua", "0"))
change this to
if ($ua && !pcre_match_group("$ua", "0"))
NOTE: apply changes required edited by bloxsupport1 on 2/25/2018 |
3/4/2018
Topic:
FreeBlox character limit on SIP Registrar server
bloxsupport1
|
Please let us the knows the output of the command "rpm -qa | grep blox" volga629 wrote:
Same think blox-1-0-6-stable |
3/6/2018
Topic:
FreeBlox character limit on SIP Registrar server
bloxsupport1
|
Send us the screen shot of the error you are getting. Please send to support@blox.org
Thanks Blox Support Team.
volga629 wrote:
[root@casbc00 ~]# rpm -qa | grep blox freeblox-1.0.6-19.x86_64 blox_rtppinhole-1.0.6-19.x86_64 blox_security-1.0.6-19.x86_64 blox_core-1.0.6-19.x86_64 blox_rtpengine-1.0.6-19.x86_64 blox_opensips-1.0.6-19.x86_64 blox-rpm-keys-1.0.6-19.x86_64 blox_ministun_client-1.0.6-19.x86_64
bloxsupport1 wrote:
Please let us the knows the output of the command "rpm -qa | grep blox" volga629 wrote:
Same think blox-1-0-6-stable edited by bloxsupport1 on 3/6/2018 |
3/12/2018
Topic:
SIPREC support?
bloxsupport1
|
It is possible, please contact enquiry@blox.org with your requirement details |
3/12/2018
Topic:
SIP Profiles for UDP and TCP on the same port
bloxsupport1
|
The limitation is in the management FreeBlox GUI tool, it is possible |
3/14/2018
Topic:
Unable to upgrade to 1.0.6-19
bloxsupport1
|
Hi, can you please let us know the file name you are uploading, also send us the output of the command $ rpm -qa | grep blox". $ cat /var/tmp/.fw_upgrade.log $ cat /var/tmp/.firmware_upg
Please send all the details to support@blox.org
Thanks
hmmartinez wrote:
I can't upgrade Blox from GUI. System reboot but file version are the same.
Could you point me in the right procedure to apply the update of Blox 1.0.6-19 without the GUI? edited by hmmartinez on 3/14/2018 |