4/12/2019
Topic:
2 or more sip trunk provider and 1 ip pbx
bloxsupport1
|
currently Blox supports forwarding to single inbound URI from the Trunk, and feature to route based on DID is not supported. |
4/12/2019
Topic:
GUI Demo KO
bloxsupport1
|
Currently facing a temporary issue with connection to Demo site, it should be up by Monday. |
4/15/2019
Topic:
GUI Demo KO
bloxsupport1
|
hi, It is up, you can access now edited by bloxsupport1 on 4/15/2019 |
4/23/2019
Topic:
No media via tagged interface or how configure tag
bloxsupport1
|
Hi,
Yes, VLAN support Freeblox GUI tool is limited, since it is freeware version.
If you require licensed version for the Freeblox GUI tool, please contact [email protected]
Thanks |
4/23/2019
Topic:
Freeblox UI install error
bloxsupport1
|
The reason for manually configured interface disappearing is freeblox tool clear and only configure according to what it founds in it configuration. since there is no configuration at initial time, the interface configuration getting removed.
run the freeblox install i.e "rpm -ivh freeblox-version.rpm" command in the console rather than running via ssh (remote), this will ensure the install script runs completely while re-configuring interfaces.
After installing freeblox assign manually IP address for blox, login to GUI, configure the interfaces via network settings. To detect the currently available network interface you can make use of the network refresh button (in dashboard). Once this setup is done, interface will be stable and controlled by Freeblox tool. refer: http://forum.blox.org/topic89-network-card-invisible.aspx |
4/24/2019
Topic:
Freeblox UI install error
bloxsupport1
|
This is already explained in previous post
After installing freeblox assign manually IP address for blox, login to GUI, configure the interfaces via network settings. To detect the currently available network interface you can make use of the network refresh button (in dashboard). Once this setup is done, interface will be stable and controlled by Freeblox tool.refer:http://forum.blox.org/topic89-network-card-invisible.aspx |
5/5/2019
Topic:
Teams Direct Routing
bloxsupport1
|
Hello Gerry,
We havn't tried with Microsoft Team direct routing, It should go fine as per SIP RFC. Let us know if there any issues you were facing on integration ?
Regards,
Blox Support Team |
5/8/2019
Topic:
Teams Direct Routing
bloxsupport1
|
You can find the documentation along with Freeblox gui tool download (archive)
https://www.allo.com/sbc.html |
6/4/2019
Topic:
What SIP Threats that Blox DPI can detect?
bloxsupport1
|
DPI can be disabled from troubleshooting menu but it is not advisable to disable DPI permenantly, which will make Blox SBC to be vulnerable |
6/19/2019
Topic:
2 or more sip trunk provider and 1 ip pbx
bloxsupport1
|
Its not possible to do load balance between PBX or fallback Trunk inbound calls, it is one to one mapping
LCR works on virtual trunk created/configured from PBX to SBC for outbound dial, SBC can match and reroute the call using Diversion towards PBX to pick the Real Trunk |
7/24/2019
Topic:
BLOX not responding to OPTIONS requests
bloxsupport1
|
You need to edit the script from /etc/blox/blox.cfg.m4 and do apply changes from the GUI which will sync up properly |
3/11/2020
Topic:
SIP Profiles - One use only.
bloxsupport1
|
No,
It must be a typo
A single SIP Profile can't be connected to multiple SIP Trunks edited by bloxsupport1 on 3/11/2020 |