5/28/2017
Topic:
ITSP does not support OPTIONS or NOTIFY
bloxsupport1
|
/etc/blox/blox-modparam.cfg.m4
modparam("drouting", "probing_reply_codes", "501, 403, 404")
add 405
modparam("drouting", "probing_reply_codes", "501, 403, 404, 405")
This will be considered as valid response |
5/28/2017
Topic:
Blox as a load balancing and failover functional.
bloxsupport1
|
netsteller wrote:
Ok, so this won't do redundancy failover if one Blox server goes offline?
Will it load-balance between 2 Blox servers?
It should work |
5/28/2017
Topic:
Remote Users v1.0.4.00.8
bloxsupport1
|
There is no multiple registration support. |
5/29/2017
Topic:
Error in header rule and text truncated
bloxsupport1
|
Thanks for your feedback
Yes we fixed it, fix will be available in newer release
edited by bloxsupport1 on 5/29/2017 |
5/31/2017
Topic:
SIP WAN Profile Limitation
bloxsupport1
|
We had received your email
netsteller wrote:
I have emailed you the backup configuration.
thx josh |
5/31/2017
Topic:
SIP WAN Profile Limitation
bloxsupport1
|
We had received your email, we will verify it and will get back to you
netsteller wrote:
I have emailed you the backup configuration.
thx josh
edited by bloxsupport1 on 5/31/2017 |
6/1/2017
Topic:
SIP Header manipulation
bloxsupport1
|
Hi,
Can you please let us know in which URI port you need to make changes.
Thanks and Regards,
Blox Support Team
imstest321 wrote:
Dear sir,
my softphone register to Kamailio through blox SBC configuring Roaming Users.
The SIP port of Kamailio is 4060.
Would you please tell me how to remove the URI port 4060 using SIP Header function of SIP message to Kamailio?
Thanks a lot. |
6/2/2017
Topic:
SIP Header manipulation
bloxsupport1
|
imstest321 wrote:
Dear sir,
Thanks your reply.
Our network architecture was shown below.
softphone ---->Blox---->Kamailio (SIP port 4060)
The original SIP message from softphone to Blox was
REGISTER sip:ims.kamailio.org SIP/2.0
From Blox to Kamailio was
REGISTER sip:ims.kamailio.org:4060;transport=udp SIP/2.0
The response message from Kamailio was
SIP/2.0 483 Too Many Hops
We want to remove the RequestURI port 4060 using SIP Header function.
Thanks.
Uncheck the bind port in SIP domain used in Roaming user destination domain |
6/6/2017
Topic:
SIP Header manipulation
bloxsupport1
|
Hi,
In the current version of the firmware it is not possible, we will be fixing the issue in next release. Next release will be in 2 weeks of time.
Thanks and Regards,
Blox Support Team
imstest321 wrote:
Dear sir,
The bind port and bind host were unchecked in SIP domain right now.
FreeBlox version : 1.0.4.00 8
Thanks.
edited by imstest321 on 6/2/2017 |
6/7/2017
Topic:
How to install Freeblox GUI
bloxsupport1
|
Hi,
Please follow the below steps to install the Freeblox
- Extract the archive freeblox.tar file, using following command
- tar xf [download_path]/freeblox.tar
- copy the freeblox-x.xx.xx.x86_64.rpm file to the blox machine
- Install the freeblox package using the command " rpm -ivh freeblox-x.xx.xx.x86_64.rpm "
- Reboot the system once the installation gets completed
- Login to the freeblox GUI using the WAN IP address
- Refer the User manual for details regarding accessing the gui
Thanks & Regards
Blox Support Team
wuthichai wrote:
Dear Sir,
I already installed BLOX that is working fine.
And I also download Freeblox.tar, How can I install it to BLOX linux OS ?
If anyone know please share with me.
Thank you. |
6/15/2017
Topic:
How to install Freeblox GUI
bloxsupport1
|
Hi,
Please follow the below steps to install the Freeblox
- Extract the archive freeblox.tar file, using following command
- tar xf [download_path]/freeblox.tar
- copy the freeblox-x.xx.xx.x86_64.rpm file to the blox machine
- Install the freeblox package using the command " rpm -ivh freeblox-x.xx.xx.x86_64.rpm "
- Reboot the system once the installation gets completed
- Login to the freeblox GUI using the WAN IP address
- Refer the User manual for details regarding accessing the gui
Thanks & Regards
Blox Support Team
philers wrote:
http://www.youtube.com/watch?v=XXXXXXXXXXX wuthichai wrote:
Dear Sir,
I already installed BLOX that is working fine.
And I also download Freeblox.tar, How can I install it to BLOX linux OS ?
If anyone know please share with me.
Thank you.
edited by philers on 6/15/2017 |
6/20/2017
Topic:
Blox and Lync 2013/Skype for Business
bloxsupport1
|
Hi,
Please contact the Blox support team to get resolve the issue.
You can also contact us through skype at "blox.support" for online support.
Thanks and Regards
Blox Support Team
NH wrote:
Has anyone been able to get this working, trying to get Lync/S4b connected up to a Flowroute trunk with no success.
edited by NH on 6/15/2017 |
6/27/2017
Topic:
Read Only SQLITE?
bloxsupport1
|
hello sebastian,
Can you run the following command and send us output
$ rpm -qa | grep blox
$ cat /etc/issue |
6/27/2017
Topic:
Read Only SQLITE?
bloxsupport1
|
Hello Sabastian,
Can you reinstall freeblox rpm again using following command
$ rpm -ivh --force freeblox-1.0.4.x86_64.rpm
username: admin
password: admin
Let know if you get error.
also send us the output of
$ ls -lRt /etc/freeblox*
and
$ ps aux | grep blox
edited by bloxsupport1 on 6/27/2017
edited by bloxsupport1 on 6/27/2017 |
6/28/2017
Topic:
Read Only SQLITE?
bloxsupport1
|
output of following command ?
$ php -v |
6/29/2017
Topic:
Read Only SQLITE?
bloxsupport1
|
Hello Sebastian,
Is it possible to provide us remote access ? you can send the credential and access info to support@blox.org
Thanks |
6/30/2017
Topic:
Read Only SQLITE?
bloxsupport1
|
Incase anyone facing the similar issue, please disable the selinux and reboot
refer: https://www.centos.org/docs/5/html/5.1/Deployment_Guide/sec-sel-enable-disable.html |
7/12/2017
Topic:
Outgoing Caller ID
bloxsupport1
|
let us know the output of following command
$ rpm -qa | grep blox |
7/17/2017
Topic:
SIP WAN Profile Limitation
bloxsupport1
|
Hello Josh,
How many SIP profiles you are trying to create, MAX ?
Can you send us the /var/log/opensips.log ?
edited by bloxsupport1 on 7/17/2017 |
7/18/2017
Topic:
Missing Interfaces and profiles
bloxsupport1
|
Please send us the output of the following command,
$ rpm -qa | grep blox
$ ps ax | grep blox |