7/11/2017
Topic:
Outgoing Caller ID
opsit
|
Hi All,
I'd just test the freeblox with 3cx, I can successfully call in/out from the 3cx, but the out going caller ID can only shown my main number, so please advise where I can setup to use the DID number of each extension as the out going caller ID, many thanks. |
7/11/2017
Topic:
Outgoing Caller ID
opsit
|
Hi, yes, if the sip trunk connect to the 3cx directly, the out going caller ID is correct, but if the sip connected via the block, the caller ID will shown the main did number only. |
7/11/2017
Topic:
Outgoing Caller ID
opsit
|
Hi, no, I leave it empty |
8/2/2017
Topic:
call drop suddently
opsit
|
Hi all,
I'd setup the SBC with 3CX, I can call out / in successfully, but the calls will suddenly drooped. sometimes in a min and sometimes in a few mins. the SIP trunk is working fine if I connect it directly with the 3cx.
any idea? thanks |
8/2/2017
Topic:
call drop suddently
opsit
|
attached the packet capture fyi, thanks a lot |
8/2/2017
Topic:
call drop suddently
opsit
|
and here the config backup fyi, thanks |