3/24/2015
Topic:
Downloading BLOX
danielbrogren
|
Hi
Is there a link to the ISO so that I can download it directly to my PROXMOX enviroment. |
3/24/2015
Topic:
Downloading BLOX
danielbrogren
|
Hi
no, I mean a link for the BLOX-iso.
Like the one you can use when installing Ubuntu. http://releases.ubuntu.com/14.04.2/ubuntu-14.04.2-desktop-amd64.iso |
3/24/2015
Topic:
Installing issues on Proxmox
danielbrogren
|
Hi
Im trying to install the BLOX on a Proxmox enviroment.
I get the message "The Blox disc was not found in any of your CDSOM drives. Please insrt the Blox disc and press OK to retry."
INFO: starting STEP_STAGE2 INFO: trying to mount CD device /dev/sr0 on /mnt/stage2 INFO: drive status is CDS_DISC_OK INFO: tranfering /mnt/stage2/images/install.img to /tmp ERROR : failed to mount loopback device /dev/loop0 on /mnt/runtime as /tmp/install.img (null) INFO: mounting stage2 failed INFO: ejecting /dev/sr0... |
3/24/2015
Topic:
Installing issues on Proxmox
danielbrogren
|
I get the message INFO kernel:attempt to access beyond end of device INFO kernel:sr0: rw=0, want =903276, limit=903272
If there a possibility get a prompt during the installation? |
3/26/2015
Topic:
Installing issues on Proxmox
danielbrogren
|
Im setting up the VM like this:
OS: Linux 3.X/2.6 Kernel (l26)
CD/DVD: Use CD/DVD disc image file (iso) Blox.iso (but the full name...)
Hard disk: IDE 0 stoarage: local 32GB Raw
CPU: KVM64
Memory: 2048
Network: VirtIO
Language: English
Keybord: sv-latin |
3/26/2015
Topic:
Installing issues on Proxmox
danielbrogren
|
Now the installation started. Earlier I did the download from windows and then copied (via ftp) it to the Proxmox. Now I downloaded to a Linux enviroment and the used nfs to get it to the Proxmox enviroment.
It would be good with a download URL instead of how it is today.
Thanks with the support. |
3/27/2015
Topic:
Network configuration
danielbrogren
|
I want to set up a SBC between two Asterisk plattforms as a trial. It will be used later on as a firewall towards our National voice interconnect.
I have a virtual machine (Proxmox) and I have two physical interfaces.
Eth0 (vmbr0) is connected to the Management network
Eth1 (vmnr1) is connected to a switch where I seperate my network in two VLAN 10 and 20 -vmbr1 VLAN10 is connected too one of the Asterisk plattforms (local side) -vmbr1 VLAN20 is connected too the second Asterisk plattform
So on my virtual machine I want to have the following configuration eth0 management eth1 Asterisk (local side) eth2 Asterisk (remote side)
Is this set up possible to arrange. It feels like the GUI is somewhay stering me in other directions.
-I want the default gateway toward the management interface since the GUI is for the management. And thats where I have my DNS and so on. -I guess the GUI is chaning som configuration-files in the background. Where are those cfg-files and how is that interation. |
3/27/2015
Topic:
BLOX in VMware
danielbrogren
|
Yes. It have been testen on VMware and Peoxmox. see: http://forum.blox.org/messages.aspx?TopicID=15 |
3/27/2015
Topic:
Media Profile
danielbrogren
|
I want my SCB just to be transparent for media streams, no transoding should be done. Do I have to set up a Media Profile? |