blox

   

HomeBLOX Support

Get help with installing and configuring Blox SBC

Configuring FreeBLOX with ShoreTel and Flowroute Messages in this topic - RSS

Randy McGlenn
Randy McGlenn
Posts: 1


8/21/2018
Randy McGlenn
Randy McGlenn
Posts: 1
Greetings,

I am trying to configure FreeBLOX SBC to connect a ShoreTel 14.2 PBX to Flowroute SIP.

After reviewing the user manual and configuration guide, the best results I have gotten so far is that inbound works with audio from the SIP Proxy switch of the ShoreTel PBX (an SG220T1A with IP 10.3.1.101), after transferring to an extension, I get no audio. Outbound does not work at all (reorder tone). After about a minute the SBC loses trunk registration.

My configuration overview is as follows: (please note no security is place as I am still trying to get it working)


Interfaces:

eth0: 10.3.1.99 (LAN)
eth1: x.x.x.156 (WAN) GW: x.x.x.158 (NO-NAT)


SIP Domains:
10.3.1.101 - Bind Port and Host
us-west-wa.sip.flowroute.com - Bind Port

SIP Profiles:
Inside -
Interface: eth0
SIP Proto/port: udp/5060
SIP TOS: 23
SIP Domain: 10.3.1.101
Allow: any
SIP Headers: [none]

Outside -

Interface: eth1
SIP Proto/port: udp/5060
SIP TOS: 23
SIP Domain: us-west-wa.sip.flowroute.com
Allow: any

SIP Headers: [none]

Trunk Configuration:
Flowroute -
Server: us-west-wa.sip.flowroute.com:5060
Trunk Domain: us-west-wa.sip.flowroute.com
Trunk Username: xxxxxxxxx
Trunk Password: xxxxxxxxx
SIP Registrar: x.x.x.156:5060
Register Expire: 3600
Outbound Proxy URI: us-west-wa.sip.flowroute.com:5060
Internal SIP Profile: Inside
External SIP Profile: Outside
Strip Digits: 1
Allow Inbound: True
Inbound Config: Inbound Domain: 10.3.1.101 Inbound URI: 10.3.1.101:5060
Max Inbound: 23
Allow Outbound: True
Max Outbound: 23
Enum: False

I have exhausted changing each of these parameters with other possible values to see if things improve but usually end up with no inbound nor outbound.

At this point I am out of ideas. I appreciate any help.

Thanks in advance!
0 link
bloxsupport1
bloxsupport1
Posts: 211


8/22/2018
bloxsupport1
bloxsupport1
Posts: 211
Hi,
Can you please mail us the config backup of Blox to support@blox.org


Regards
Blox Support
0 link






Powered by blox.org 1.0.0.0 © 2015