Get help with installing and configuring Blox SBC
Network configuration
|
danielbrogren Posts: 9
3/27/2015
|
I want to set up a SBC between two Asterisk plattforms as a trial. It will be used later on as a firewall towards our National voice interconnect.
I have a virtual machine (Proxmox) and I have two physical interfaces.
Eth0 (vmbr0) is connected to the Management network
Eth1 (vmnr1) is connected to a switch where I seperate my network in two VLAN 10 and 20
-vmbr1 VLAN10 is connected too one of the Asterisk plattforms (local side)
-vmbr1 VLAN20 is connected too the second Asterisk plattform
So on my virtual machine I want to have the following configuration
eth0 management
eth1 Asterisk (local side)
eth2 Asterisk (remote side)
Is this set up possible to arrange. It feels like the GUI is somewhay stering me in other directions.
-I want the default gateway toward the management interface since the GUI is for the management. And thats where I have my DNS and so on.
-I guess the GUI is chaning som configuration-files in the background. Where are those cfg-files and how is that interation.
|
|
|
0
link
|