Get help with installing and configuring Blox SBC
single interface network/sip domain config
mkeys Posts: 6
5/10/2017
|
Given the topology:
[internet] <--> [ISP router/gateway] <--> [internal lan]
Where blox and private pbx are both on the same internal interface/network, is this an acceptable use case? The documentation seems to imply that two interfaces are required for config. If single nic is an acceptable config, would someone mind posting an example?
I also wanted to report that in the network configuration, where you must set NAT type as STUN or STATIC, if you choose STATIC and try to use a dynamic DNS hostname this will fail as it requires a IP address rather than FQDN.
Regards, Matt
|
|
0
link
|