12/17/2015
Topic:
Lync 2010 config SBC
varadhanAdministrator
|
Hi
Good work for the product !!
got a bit of questions...
1. Is it working like SBC for Lync 2010 ?
We follow the SIP standards and We haven't tested with Lync, but we can help you out
2. If no transcodind card present (virtual m.) its enough to create a dedicate IP for Media profile ?
You can create Virtual IP (without conflicting other network ip) this might not be required from the next version.
If Yes for Lync.. for Lan Sip Profile ..
1.1 To communicate with Lync needs TLS ? 1.1.1. For TLS Cert config which fortmat type of files are needed ?
Do you wanted to use self-signed or you already have custom / third party certs ?
If Custom/Third Party certs You need to upload the CA cert server certificate: p12 format should include the ca cert e.g: /usr/bin/openssl pkcs12 -export -in server.crt -inkey server.key -certfile cacert.crt -out server.pkcs12 -password pass:
1.2 Which Media Profile for Lync ?
You can create a media profile with Virtual IP and make use of it
Could you help me ?
will try with the documentation provided, but is a bit minimal, no scenario examples.
Regards, Biagio
|
2/5/2016
Topic:
IP Auth on Roaming Users
varadhanAdministrator
|
Allow IP address in the WAN Profile will be used to authenticate based on IP |
2/5/2016
Topic:
Default Password after install
varadhanAdministrator
|
There is no default password, it is what you give in during installation, you can try recovering from bootloader using single use mode |
2/5/2016
Topic:
Help setting up Blox
varadhanAdministrator
|
Create SIP profile for WAN and LAN side, In your LAN side SIP Profile select protocol as TCP in allow IP add the PBX IP and WAN Side you can use UDP allow ip add the Trunk provider IP
Assign the created SIP profile while setting up Trunk configuration, make IP Authentication checked it will use the SIP profile configuration accordingly
you can also get online support via skype : blox.support (10AMto5PM IST, Monday to Friday) |
2/24/2016
Topic:
User Field Truncated to 31 Characters
varadhanAdministrator
|
You contact us in Skype: blox.support to get it fixed |
3/3/2016
Topic:
Configuring trunk on Blox
varadhanAdministrator
|
Please send email to support@blox.org, so we can assist you in configuration You can also chat with us live in skype: blox.support |
3/3/2016
Topic:
Open ports in Blox firewall
varadhanAdministrator
|
Blox runs with custom made firewall filters and nat May I know why you need to open range of ports ? |
3/8/2016
Topic:
Open ports in Blox firewall
varadhanAdministrator
|
Hello, You can get in touch with us via mail support@blox.org or online support skype blox.support |
3/20/2016
Topic:
Multi Tenancy
varadhanAdministrator
|
Hello Chris, Not yet, we are working on it |
5/27/2016
Topic:
Architectures supported?
varadhanAdministrator
|
Currently it is available for only x86 64 bit platform |
5/27/2016
Topic:
Channels and performance requirements?
varadhanAdministrator
|
Performance tuning needs to be done based on the hardware you choose, but currently we support only x86 64 bit. |
5/27/2016
Topic:
codec support
varadhanAdministrator
|
With basic media profile you should able to configure only in bypassing mode, Adding Allo Transcoding Card will give you the support to configure codecs while creating media profile |
6/13/2016
Topic:
Blox Features
varadhanAdministrator
|
Hello Dalton,
Blox Supports above mentioned expect below cases 1. Upper Registration is possible only via Transaction it would be adding the Via header on the Request towards internal PBX, but it still hides the internal topology information from Via Header on the response towards the client. 4) It needs to be able to trans-code where necessary. - to do this you need allo transcoding card. 6. Domain based routing will be available soon in the next release.
Thanks edited by varadhan on 6/13/2016 |
6/14/2016
Topic:
Blox Features
varadhanAdministrator
|
mhasanbd wrote:
Having problem with configuring Trunk. I've two asterisk call server and want to use Blox at border of those two. I've gone through the Blox manual, but the trunk among Blox, Internal Server and External server is not working. need immediate help. Is there anyone up here? please!!!
Hello, We might need to understand the issue and configurtion you have made so far. Please contact for online support: blox.support and send your screenshot to support@blox.org |
7/11/2016
Topic:
Version: 1.0.0 beta available for download
varadhanAdministrator
|
version: 1.0.0-32 beta available for download Core Modules * Domain binding for SIP Profiles * Domain based routing for Romaing User * SIP Header Manipulation * SIP Presence(MWI) and Voicemail Indication NOTIFY Support for Roaming user * Firmware upgradation with configuration migration Bug Fixed: [Bug #243] Logrotate is not happening when bombarding with flood attack [Bug #288] Loopback interface is not displaying in the ifconfig command. [Bug #238] Remote logging configuration is not working properly. [Bug #138] Roaming user with SRTP as optional returns 488 Not Acceptable. [Bug #108] SBC is not blocking UDP Flood [Bug #241] Not able to delete the configured email address in the email server settings. [Bug #283] vlan and virtual ip is not updating in the backend [Bug #284] port forwarding is not working [Bug #224] Backend provisioning not happening for ip auth in roaming users Freeblox GUI(Freeware License) * Networking Interface Manager - allows to add multiple interface and configuration * Dashboard with Inteface detection * Domain binding for SIP Profiles * Domain based routing for Romaing User * NAT Keepalive settings * SIP Header Manipulation * SIP Presence and Voicemail Indication NOTIFY Support for Roaming user * Simplified Media profile configuration * TLS configuration with optional client cert verification Bugs Fixed: [Bug #255] SIP Profile TLS checked [Bug #257] SIP Trunk Password Field length [Bug #270] Network - Device setting Profile [Bug #285] Vlan &Virtual ip is not displaying in sip profile and media profle drop down box [Bug #289] Interface eth0 is not displaying in the ifconfig command but displaying in the dashboard network status in GUI. [Bug #281] SSH configuration through GUI is not updating in both GUI and backend [Bug #287] BS: Freeblox version is displaying wrongly in the GUI dashboard [Bug #286] BS: Not able to delete the VLAN configuration through GUI [Bug #290] Segmentation fault bloxconfig(9) updating the freeblox package. [Bug #272] Signalling - SIP Profile - Dependency GUI issue |
7/12/2016
Topic:
Version: 1.0.0 beta available for download
varadhanAdministrator
|
volga629 wrote:
Hello Everyone, Is possible check freeblox.rar it impossible to extract rpm from it.
Thanks
Just try with following command $ tar xf [download_path]/freeblox.rar |
7/14/2016
Topic:
SIP Signalling - Elastix
varadhanAdministrator
|
peakers wrote:
I have set up a SIP profile to receive calls from my Elastix PBX.
It keeps failing when i call with the following error under the signalling logs
Jul 14 12:25:12 Received 10.20.20.159:5062 Got OPTIONS sip:Unknown@10.20.20.158/sip 10.20.20.159/10.20.20.158 Jul 14 12:25:12 Unknown SIP Profile sip:10.20.20.159:5062;transport=udp ==> Jul 14 12:24:12 Received 10.20.20.159:5062 Got OPTIONS sip:Unknown@10.20.20.158/sip 10.20.20.159/10.20.20.158
A Sip profile has been created and is connected via Elaxtix
BloxTrunk 10.20.20.159 Yes Yes 5062 OK (2 ms)
Can someone please help me out with this please.
The problem has been addressed, with script update
https://raw.githubusercontent.com/blox-org/blox-cfg/master/scripts/generate_siphm_routes.sh
download it from github, this file should replace the existing file: /usr/bin/generate_siphm_routes.sh
New upgrade package will be available soon with this fix. edited by varadhan on 7/14/2016 |
8/22/2016
Topic:
firewall problem
varadhanAdministrator
|
volga629 wrote:
Hello Everyone, I applied in web ui to allow access for management ports like 22,80,443 be available from LAN subnet only, but rules not applied to actual iptables. I suggest you look into ipset with iptables mix. That will allow you have match more dynamic firewall.
Please advise how to fix it.
1650 119929 INPUT_FILTER tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 2280 271027 INPUT_FILTER tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 4 216 INPUT_FILTER tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
Please send screenshot of device access page to our mail id support@blox.org |
9/5/2016
Topic:
firewall problem
varadhanAdministrator
|
volga629 wrote:
Done. Should be in support inbox
We haven't received any mails.
You need to disable the default device access, which allow all ports by default. You can configure it manually creating separate rule to create specific rule set. |
9/29/2016
Topic:
Passing Incoming DID to backend PBX
varadhanAdministrator
|
Hello Josh,
You can download updated the file from github https://github.com/blox-org/blox-cfg/blob/2705f972accd87f9cb098acbb0049c5d2fc6fe58/opensips/blox-invite.cfg.m4
put it in /etc/blox folder and do apply changes from Freeblox GUI (modify any SIP Profile description field, apply changes button will get enabled)
This should resolve your issue.
Regards, Varadhan M |