6/14/2015
Topic:
Dropping SIP Method ACK received from sip
varadhanAdministrator
|
Can you paste the Blox log from /var/log/opensips.log ?
You can also get support from skype id: blox.support
Dont need to disable DPI edited by varadhan on 6/14/2015 |
7/7/2015
Topic:
Call routing
varadhanAdministrator
|
those domain names are valid FQDN ?
Why not route with different roaming user profile ? probably configure outbound proxy to route with IP:Port in End points |
7/8/2015
Topic:
I am new to SBC
varadhanAdministrator
|
you can download the manual and follow the instruction in the download page
you can download freeblox GUI configuration tool (freeware version) as mentioned in the download webpage it contains packages and freeblox user manual, you can follow that and configure your SBC. |
7/15/2015
Topic:
UCM Publishing
varadhanAdministrator
|
can you come online in skype (blox.support) so that we can guide you
Thanks edited by varadhan on 7/15/2015 |
7/15/2015
Topic:
Call routing
varadhanAdministrator
|
You can do it with different (unique) IP:Port, so you should use different domain resolve to different IP You can create Virtual IP on the WAN Interface and assign different IP and domain on WAN Profile
Then you need to create multiple roaming user profile using WAN profile and forward to different asterisk box.
For immediate response for your queries, you can chat us on skype: blox.support |
8/12/2015
Topic:
IP Authentication
varadhanAdministrator
|
Hello,
1. We have made the changes for this REGISTRAR as optional, which will get it resolved in the next release. (before this month end)
2. Temporarily, you can manually remove with following commands
$ mysql -u opensips opensips_1_11 --password=opensipsrw -e 'delete from registrant'; $ /etc/init.d/opensips restart
These changes might get overwritten (reappear), once you make changes in GUI and do apply changes so again you need to run both the commands, this is temporary solution for you to proceed.
Thanks |
8/13/2015
Topic:
Manage Concurrent Calls
varadhanAdministrator
|
Hello,
No, Currently its per Trunk or Roaming User not per IP |
8/31/2015
Topic:
RELEASE 0.9.9 Beta
varadhanAdministrator
|
Version: 0.9.9 beta available for download
Blox Modules * Added support for RTPEngine in opensips 1.11, opensips script updated * Migrated to RTPEngine from RTPProxy * Removed Transcoding module dependency to RTPProxy to choose port number, now MTS Server will support reserving media ports * Added new Library for RTPPinholing, which will be used by Allo Media Transcoding Server * Removed Miniupnp module for RTPPinholing * Passthrough support for 800 channels (Allo Transcoding Card) * Support for Call Recording / Lawful interception added for Allo Media Transcoding Server (Only voice termination, Passthrough Termination inprogres s) * Increased log print buffer in opensips * Added support Media statistics from Allo Transcoding server * Build Changes to add RTPEngine and RTPPinholing library FreeBlox and Security Modules * Humbug Plugin Provisioning Support. * Provisioning changes to support RTPProxy to RTPEngine migration. * Useragent configuration * Config Migration Script Plugin for RPM Upgrade & Config Backup/Restore scenarios. * Support for USB ISO Installation * Added ENUM Support * Trunk Configuration: Inbound URI modified to accept SIP URI with username * SIP Header Manipulation support added to the backend and shell script to generate opensips script * Support for SIP Header Manipulation in contact header topology hiding module, to add URI params
Bugs Fixed: [Bug #000] Adding default geoip database values set. [Bug #234] Fixed Humbug php script issue due to php version change [Bug #234] CDR issue with adding direction inbound or outbound fixed [Bug #234] Optimized humbug cdr script to access env variable configured in opensipsctlrc [Bug #000] Fixed duplication of User-Agent and Server Header [Bug #000] opensips RPM Package installation to preserve configuration made and restoring it [Bug #000] opensips script request uri needs to be changed to pbx ip:port during upper registration [Bug #000] opensips script Contact substution had wrong end quote, removed now [Bug #191] Transcoding issue between ulaw/alaw [Bug #121] opensipsctl build error to have CAPASS for cert generation [Bug #222] Name server is changing from the configured ip address. [Bug #221] Virtual ip is not getting updated after service network restart [Bug #121] Configuring sip trunks and Roaming users with TLS is not working properly [Bug #117] Unable to ping the external ip address from internal VLAN Network [Bug #208] Fix for Roaming User Forward Registrar [Bug #171] Unable to install php-cli - php-cli install will be native OS package [Bug #165] Trunk User Agent Blox-0.9.0-beta [Bug #121] Configuring sip trunks and Roaming users with TLS is not working properly [Bug #94] Fixed NAT and STUN settings are not working properly
FreeBlox GUI (Freeware License) Bugs Fixed: [Bug #121] Enable TLS cert selection in sip profile [Bug #234] Fixed Humbug Cron entry [Bug #234] Fixed Humbug configruation issue during config/restore [Bug #217] Freeblox version displayed in the dashboard is changing after backup restore. [Bug #224] Backend provisioning not happening for ip auth in roaming users [Bug #205] Package Upgrade [Bug #204] Factory reset not working [Bug #202] Diagnosis Report [Bug #198] Unable to delete and save the user-agent configuration. [Bug #197] SIP REGISTRAR is Optional [Bug #194] Trunk REGISTRAR length [Bug #192] Pop up message when saving global settings is displaying as NAT settings. [Bug #188] Unable to upload the configuration file taken from the previous build. [Bug #185] Port Forwarding Not working edited by varadhan on 6/6/2016 |
8/31/2015
Topic:
Geo IP Data
varadhanAdministrator
|
@talknet: can you try with the current release 0.9.9 beta ? |
9/6/2015
Topic:
Missing IPv6 Support
varadhanAdministrator
|
Hello,
Yes, we will provide the support for IPv6 in near future, after stabilizing the current basic version.
Thanks |
9/10/2015
Topic:
IP Authentication
varadhanAdministrator
|
You can ignore the REGISTRAR part to avoid REGISTRATION, also specify the dummy username/password just to avoid validation issue. It will not be used unless there is a challenge for authentication. |
9/22/2015
Topic:
BUG
varadhanAdministrator
|
Hello, can you do config backup of the system (tools->administration) and send to support@blox.org ? |
9/22/2015
Topic:
HA
varadhanAdministrator
|
No High availability support yet. |
9/22/2015
Topic:
Multi Tenancy
varadhanAdministrator
|
Currently there is no support for multiple interfaces, We are currently working to support multiple interface This will be soon available in the next release with load balancing. |
9/28/2015
Topic:
Multi Tenancy
varadhanAdministrator
|
We are planning to release within couple of months. |
10/24/2015
Topic:
Transcoding card.
varadhanAdministrator
|
volga629 wrote:
Hello Everyone, I installed sbc with gui and default configuration works. In order to install drivers with software for transcoding card do I need install asterisk ? Or sbc him self can handle it ? Please explain exactly how to need to do it. I red documentation and it not clear. We ordered the card and it on the way, I want make sure that it will clear what to do when it will arrive.
Blox will work with only Allo Transcoding Card, kindly contact support@blox.org for the transcoding software installation. |
10/24/2015
Topic:
Call routing
varadhanAdministrator
|
volga629 wrote:
Here some questions based on what I tried to setup.
Hello Everyone, How I can manage multiply caller ID for same trunk. How I can do outbound route to provider and assign caller ID based on dialed prefix ? Also how to maintain multiply DID registration for same trunk
Which IP PBX you are using ? May I know why you want to do it in SBC and not in IP PBX ? |
11/2/2015
Topic:
Call routing
varadhanAdministrator
|
Hello,
For you to choose the Caller ID Based on Dialed Prefix can be done via SIP Header Manipluation, this feature still under development. Should be available with next release. |
11/20/2015
Topic:
Trouble with Polycom registration
varadhanAdministrator
|
Hello,
You need not configure iptables in backend. You need to create SIP profile and create Roaming User profile to forward Polycom request to Internal Broadsoft system
for quick support you add us in skype: blox.support |
11/23/2015
Topic:
Trouble with Polycom registration
varadhanAdministrator
|
Profile domain to passes/matches SIP message requested on the specified domain.
If you still facing issue, you can contact us in Skype: blox.support kindly send us the packet trace on the internal side to support@blox.org |