2/9/2015
Topic:
Blox Supports DPI ?
varadhanAdministrator
|
Will it support Deep Packet Inspection for VoIP Traffic ? |
2/9/2015
Topic:
Blox Supports DPI ?
varadhanAdministrator
|
Yes, Supports VoIP SIP protocol
Also IPS included, which will prevent the SIP attacks |
2/9/2015
Topic:
what is the difference between SBC & STM
varadhanAdministrator
|
SBC will provide following security features
- Topology hiding - Which will prevent Internal system(LAN) network topology
- SIP NATting using Static/STUN Features
- SIP TLS
- Protocol Re-pair
- Detecting and Blocking Malformed Packet
Advanced features like
- Media Port pinholling - Opens Ports in firewall only during call establishment
- Roaming User (Securly access PBX remotely)
- Least Call Routing
- Call Access Control
With Allo Transcoding Card you can do the following
- Media Transcoding
- Media encryption
- T.38 Bridging
+ STM Features like IDS with IPS |
3/10/2015
Topic:
Where is the source ?
varadhanAdministrator
|
https://github.com/blox-org |
3/10/2015
Topic:
Where is the source ?
varadhanAdministrator
|
Where is the GUI source code ?
Blox is only the backend, which configured by Freeblox |
3/11/2015
Topic:
What is Blox ?
varadhanAdministrator
|
Currently there is no limitation on number of simultaneously calls |
3/20/2015
Topic:
dont have Media Interface ?
varadhanAdministrator
|
In order to create a sip trunk you need to create media profile. And in order to create a media profile you need media interface which is what we don’t have. |
3/20/2015
Topic:
dont have Media Interface ?
varadhanAdministrator
|
You can create a Virtual IP on the LAN Interface and use it for creating media profile. |
3/20/2015
Topic:
dont have Media Interface ?
varadhanAdministrator
|
In case of Transcoding Card, it will be detected as Media Interface. |
3/24/2015
Topic:
Installing issues on Proxmox
varadhanAdministrator
|
We have verified with vmware, kvm it works fine will check with proxmox and get back to you
also ensure that you have 64 bit architecture edited by varadhan on 3/24/2015 |
3/27/2015
Topic:
Network configuration
varadhanAdministrator
|
Freeware GUI not having provision for full Network Interface Management
eth0 management eth1 Asterisk (local side) eth2 Asterisk (remote side)
currently it does basic network management supporting two interface LAN and WAN, one Allo Transcoding card interface
Now alternatively, you can configure eth1 Asterisk (local side) as LAN Interface in Network Settings eth2 Asterisk (remote side) as WAN Interface, DNS, Gateway settings available for WAN only
For Management Interface eth0, you can need to do it manualy in /etc/sysconfig/network-scripts/ifcfg-eth0 You can edit that file to configure DNS, gateway for that specific interface
after that you can run /etc/init.d/network restart
We follow same standard of CentOS provisioning for Network Management by keeping the configuration related to network interfaces in /etc/sysconfig/network-scripts/ |
3/27/2015
Topic:
Network configuration
varadhanAdministrator
|
Incase you need more clarification contact online support: skype id: blox.support Mon-Fri (10AM to 5PM IST) |
3/31/2015
Topic:
Media Profile
varadhanAdministrator
|
yes you need to create Media profile, which require interface. You can create a Virtual IP on Internal(LAN) Interface and use it for creating Media profile |
3/31/2015
Topic:
BLOX in VMware
varadhanAdministrator
|
voip24x7 wrote:
Can I install the BLOX SBC in virtual machine?
yes |
4/9/2015
Topic:
Blox Feedback
varadhanAdministrator
|
Let us know how we can improve and your experience on Blox |
4/14/2015
Topic:
BLOX in VMware
varadhanAdministrator
|
Just ensure you have mounted the ISO in CD/DVD
https://ask.openstack.org/en/question/6527/openstack-disk-problem/ edited by varadhan on 4/14/2015 |
5/4/2015
Topic:
RELEASE 0.9.6 Beta
varadhanAdministrator
|
New BLOX release is available for Download. Many reported bugs have been taken care of. Please download the new version and continue sending us your valuable feedback.
NOTE: Freeblox GUI set-up file can be downloaded from www.allo.com (Session Border Controller >> User Interface) Username: blox1 Password: blox1*9090
edited by rohan on 5/6/2015
Version: 0.9.6 beta
Bug Fixed:
ReOpened GUI Bugs Fixed
New:
* Opensips modification done by patch applying then replacing code, this will improve merging process easier from opensource opensip * SIP Trunk REGISTRAR is Optional * IP Auth for Roaming User
Version: 0.9.5 beta
Bug Fixed:
SBC Core Modules [Bug #156] Fixed: Miniupnpd init script not executed on first boot [Bug #164] Fixed: T.38 Fax Not working [Bug #165] Fixed: Trunk User Agent Configuration moved to global settings and provisioning added [Bug #138] Fixed: Roaming user with SRTP as optional returns 488 Not Acceptable.
GUI and Security Modules GUI/DB Schema changes for CAC Roaming user Backend provisioning for Maxinbound/Maxoutbound changes in roaming users. Domain Name Validation Not able to delete the media profiles. SRTP bridging is not working in SBC if SRTP option is disabled in the internal PBX. User agent changes in GUI/Provisioning. None of attacks getting detected in sbc.
edited by varadhan on 5/10/2015 edited by varadhan on 5/20/2015 |
5/10/2015
Topic:
RELEASE 0.9.6 Beta
varadhanAdministrator
|
pap08527 wrote:
Are there any release notes documenting what bugs are fixed and any new functionality?
Updated with RELEASE NOTES |
5/28/2015
Topic:
Routing???
varadhanAdministrator
|
Hello, You can route calls based on SIP Trunk(incoming) by specifying inbound URI, currently there is no DID based routing. Load balancing feature will be added in future for hosted PBX environment. |
6/14/2015
Topic:
problem
varadhanAdministrator
|
Can you paste the Blox log from /var/log/opensips.log ? You can also get support from skype |