6/27/2017
Topic:
Read Only SQLITE?
Sepp
|
Hi everyone, I'm new to this application and just started working with it. I'm having the above posted issues, too. When I'm clicking on Refresh on the Network status I get the same error. I can't change my password either. I tried all the steps stated above which did not resolve the problems at all.
I hope you can help me Best wishes Sebastian |
6/27/2017
Topic:
Read Only SQLITE?
Sepp
|
Thanks for the fast reply. $rpm -qa | grep blox showed the following: blox_opensips-1.0.4-8.x86_64 blox_ministun_client--1.0.4-8.x86_64 blox_security-1.0.4-8.x86_64 blox-rpm-keys-1.0.4-8.x86_64 blox_rtppinhole-1.0.4-8.x86_64 blox_core-1.0.4-8.x86_64 blox_rtpengine-1.0.4-8.x86_64 freeblox-1.0.4-8.x86_64
$cat /etc/issue showed: Blox 1.0.4
Best regards Sebastian edited by Sepp on 6/27/2017 |
6/28/2017
Topic:
Read Only SQLITE?
Sepp
|
Hi, the reinstallation did not resolve the problem... This is what ls -lRt /etc/freeblox* showed me: total 28 drwxr-xr-x. 2 root root 4096 Jun 28 09:00 conf.d -rw-r--r--. 1 root root 1840 Jun 26 14:08 webserver.pem -rw-r--r--. 1 root root 384 Mar 6 07:30 blox_webui_certconf -rw-r--r--. 1 root root 1646 Mar 6 07:30 lighttpd.conf -rw-r--r--. 1 root root 186 Mar 6 07:30 modules.conf -rw-r--r--. 1 root root 46 Mar 6 07:30 webauth.conf -rw-r--r--. 1 root root 17 Mar 6 07:30 webport.conf
/etc/freeblox/conf.d: total 24 -rw-r--r--. 1 root root 714 Mar 6 07:30 access_log.conf -rw-r--r--. 1 root root 448 Mar 6 07:30 auth.conf -rw-r--r--. 1 root root 953 Mar 6 07:30 cgi.conf -rw-r--r--. 1 root root 1036 Mar 6 07:30 fastcgi.conf -rw-r--r--. 1 root root 2965 Mar 6 07:30 mime.conf -rw-r--r--. 1 root root 391 Mar 6 07:30 ssi.conf
/etc/freeblox_conf: total 4 drwxr-xr-x. 2 root root 4096 Jun 28 09:00 DB
/etc/freeblox_conf/DB: total 420 -rw-r--r--. 1 root root 142336 Jun 28 09:00 freeblox.db.persist -rw-r--r--. 1 root root 142336 Mar 27 14:20 freeblox.db -rw-r--r--. 1 root root 142336 Mar 27 14:20 freeblox.db.default
Here is the output of ps aux | grep blox: root 1848 0.0 0.0 26240 800 ? Ss 09:01 0:00 nginx: master process /usr/local/ngx-blox/sbin/nginx root 1873 0.0 0.0 8152 492 ? S 09:01 0:00 /usr/bin/inotify-recursive /var/log/blox-notify root 2011 0.0 0.3 58924 3104 ? S 09:01 0:00 /usr/sbin/freeblox -f /etc/freeblox/lighttpd.conf root 2018 0.0 0.8 245096 8612 ? Ss 09:01 0:00 /usr/bin/php-cgi -c /etc/php.ini.freeblox root 2047 0.2 0.6 245320 6540 ? S 09:01 0:00 /usr/bin/php-cgi -c /etc/php.ini.freeblox root 2684 0.0 0.0 105372 868 pts/1 S+ 09:04 0:00 grep blox
Thank in advance Best wishes Sebastian |
6/28/2017
Topic:
Read Only SQLITE?
Sepp
|
PHP 5.4.41 (cli) (build: May 15 2015 09:23:14) Copyright (c) 1997-2014 The PHP Group Zend Engine v2.4.0, Copyright (c) 1998-2014 Zend Technologies edited by Sepp on 6/28/2017 |
8/21/2017
Topic:
Method not allowed
Sepp
|
Hi everybody,
I'm facing some issues with my setup. It consists of 3 VMs one of them being the Blox SBC. One of the remaining two is used as an external PBX, which would represent a customer. The other VM is suposed to be used as an internal Next Generation Network. The networking itself seems to work as I'm capable to ping the SBC from both, NGN and the PBX, and vice versa. Each interface is located inside its own VLAN. The problem I'm facing right now is, that after configuring the Trunk, the OPTION Messages from the PBX are answered with "405 Method Not Allowed" by the SBC. Do you have any idea what the issue might be here?
Thanks in advance Sebastian edited by Sepp on 8/22/2017 |
8/22/2017
Topic:
Method not allowed
Sepp
|
Hi and thanks for the reply. The outout of the commands is
rpm -qa | grep blox blox_opensips-1.0.4-8.x86_64 blox_ministun_client-1.0.4-8.x86_64 blox_security-1.0.4-8.x86_64 blox-rpm-keys-1.0.4-8.x86_64 blox_rtppinhole-1.0.4-8.x86_64 blox_core-1.0.4-8.x86_64 blox_rtpengine-1.0.4-8.x86_64 freeblox-1.0.4-8.x86_64
ps ax | grep blox 2008 ? Ss 0:00 nginx: master process /usr/local/ngx-blox/sbin/nginx 2031 ? S 0:00 /usr/bin/inotify-recursive /var/log/blox-notify 2223 ? S 0:07 /usr/sbin/freeblox -f /etc/freeblox/lighttpd.conf 2228 ? Ss 0:00 /usr/bin/php-cgi -c /etc/php.ini.freeblox 16624 ? S 0:00 /usr/bin/php-cgi -c /etc/php.ini.freeblox 16992 pts/0 S+ 0:00 grep blox
Attached you'll find a rough Sketch of the Deployment, though I'm currently running a single SBC without the MGW.
Best wishes Sebastian edited by Sepp on 8/22/2017 edited by Sepp on 8/22/2017 |
8/24/2017
Topic:
Method not allowed
Sepp
|
I sent both files to your email address |