Get help with installing and configuring Blox SBC
Configuring FreeBLOX with ShoreTel and Flowroute
Randy McGlenn Posts: 1
8/21/2018
|
Greetings,
I am trying to configure FreeBLOX SBC to connect a ShoreTel 14.2 PBX to Flowroute SIP.
After reviewing the user manual and configuration guide, the best results I have gotten so far is that inbound works with audio from the SIP Proxy switch of the ShoreTel PBX (an SG220T1A with IP 10.3.1.101), after transferring to an extension, I get no audio. Outbound does not work at all (reorder tone). After about a minute the SBC loses trunk registration.
My configuration overview is as follows: (please note no security is place as I am still trying to get it working)
Interfaces:
eth0: 10.3.1.99 (LAN) eth1: x.x.x.156 (WAN) GW: x.x.x.158 (NO-NAT)
SIP Domains: 10.3.1.101 - Bind Port and Host us-west-wa.sip.flowroute.com - Bind Port
SIP Profiles: Inside - Interface: eth0 SIP Proto/port: udp/5060 SIP TOS: 23 SIP Domain: 10.3.1.101 Allow: any SIP Headers: [none]
Outside -
Interface: eth1 SIP Proto/port: udp/5060 SIP TOS: 23 SIP Domain: us-west-wa.sip.flowroute.com Allow: any
SIP Headers: [none]
Trunk Configuration: Flowroute - Server: us-west-wa.sip.flowroute.com:5060 Trunk Domain: us-west-wa.sip.flowroute.com Trunk Username: xxxxxxxxx Trunk Password: xxxxxxxxx SIP Registrar: x.x.x.156:5060 Register Expire: 3600 Outbound Proxy URI: us-west-wa.sip.flowroute.com:5060 Internal SIP Profile: Inside External SIP Profile: Outside Strip Digits: 1 Allow Inbound: True Inbound Config: Inbound Domain: 10.3.1.101 Inbound URI: 10.3.1.101:5060 Max Inbound: 23 Allow Outbound: True Max Outbound: 23 Enum: False
I have exhausted changing each of these parameters with other possible values to see if things improve but usually end up with no inbound nor outbound.
At this point I am out of ideas. I appreciate any help.
Thanks in advance!
|
|
0
link
|
bloxsupport1 Posts: 232
8/22/2018
|
Hi, Can you please mail us the config backup of Blox to support@blox.org
Regards Blox Support
|
|
0
link
|