Get help with installing and configuring Blox SBC
FreeBlox not using the right interface
|
francois.collerette Posts: 14
7/11/2018
|
Hi I'm hiting kind of a snag.
Blox is trying to get to my PBX throught the wrong interface. (yeah I know, you think I'm nuts)
So here is my setup for the internal LEG:
PBX (192.168.150.35) -> (192.168.150.1) DMZ Internal (172.31.150.1) -> BLOX (eth1 - 172.31.150.35)
Here is my external leg:
BLOX (eth0 - 10.255.150.35) -> (10.255.150.1) DMZ External -> External IP
When I do a PING, I can reach 192.168.150.35 no problem
When I do a TRACEROUTE, I can reach 192.168.150.35 with 172.31.150.1 without any problem.
So looks like my routing tables are OK
When I look into my DMZ Internal firewall I see this :
DENY 10.255.150.50:47016 -> 192.168.150.35:5060 TCP:SIP
So what is going on ? Why is blox trying to use 10.255.150.50 instead of the 172.31.150.35 ?
I did multiple reboots, checked my routing tables again in SSH and through the FreeBox interface.
I'm clueless at the moment.
Thanks for your help
|
|
|
0
link
|