Get help with installing and configuring Blox SBC
How to install blox - as of 2-2-2018
|
jeffjj Posts: 1
2/2/2018
|
Pretty frustrating.
Go to the downloads page http://blox.org/downloads
Get the new user ISO version 1.0.4-8
Get the existing user upgrade 1.0.6-19
Go to allo https://www.allo.com/sbc.html
and follow the FTP instructions to download the freeblox UI (currently version 1.0.6-19)
From the same FTP site, get the freeblox.tar.old1 - ftp://182.156.236.230/freeblox.tar.old1
install Blox from the 1.0.4-8 ISO
use linux command setup to set your IP addresses
use winscp in SCP mode to connect to your new blox and upload the freeblox UI, make sure sure to choose the 1.0.4-8 version
install freeblox using the rpm command given in the instructions rpm -ivh .....
reboot as needed
Make a copy of your ifcfg files
cp /etc/sysconfig/network-scripts/ifcfg* /root
login to the gui, then go to the system page to upgrade the core blox update to 1.0.6, reboot as needed, then install the freeblox update to 1.0.6 , instructions here:
http://forum.blox.org/topic100-version--available-for-download.aspx
reboot
the freeblox 1.0.6 upgrade will delete the ifcfg files.
copy them back from /root
cp /root/ifcfg* /etc/sysconfig/network-scripts
service network restart
If you're doing this on a VM, take a lot of snapshots.
edited by jeffjj on 2/2/2018
|
|
|
+1
link
|