blox

   

HomeBLOX Support

Get help with installing and configuring Blox SBC

How to install blox - as of 2-2-2018 Messages in this topic - RSS

jeffjj
jeffjj
Posts: 1


21 days ago
jeffjj
jeffjj
Posts: 1
Pretty frustrating.

Go to the downloads page http://blox.org/downloads
Get the new user ISO version 1.0.4-8
Get the existing user upgrade 1.0.6-19

Go to allo https://www.allo.com/sbc.html

and follow the FTP instructions to download the freeblox UI (currently version 1.0.6-19)
From the same FTP site, get the freeblox.tar.old1 - ftp://182.156.236.230/freeblox.tar.old1

install Blox from the 1.0.4-8 ISO
use linux command setup to set your IP addresses
use winscp in SCP mode to connect to your new blox and upload the freeblox UI, make sure sure to choose the 1.0.4-8 version

install freeblox using the rpm command given in the instructions rpm -ivh .....

reboot as needed

Make a copy of your ifcfg files

cp /etc/sysconfig/network-scripts/ifcfg* /root

login to the gui, then go to the system page to upgrade the core blox update to 1.0.6, reboot as needed, then install the freeblox update to 1.0.6 , instructions here:
http://forum.blox.org/topic100-version--available-for-download.aspx

reboot

the freeblox 1.0.6 upgrade will delete the ifcfg files.

copy them back from /root
cp /root/ifcfg* /etc/sysconfig/network-scripts

service network restart
If you're doing this on a VM, take a lot of snapshots.
edited by jeffjj on 2/2/2018
0 link






Powered by blox.org 1.0.0.0 © 2015