Get help with installing and configuring Blox SBC
Firewall Settings Rebuild
netsteller Posts: 29
11/1/2017
|
Is there a way to rebuild the firewall rules to a default setting? We backed up our current configuration using Freeblox. We restored the settings to new hardware in Freebox. The last thing we did was change the network settings for the internal LAN and external WAN network cards (different IP addresses). If we "activate" the firewall we cannot get traffic outbound on the WAN side. When we "deactivate" the firewall we can ping websites on the Internet. Sounds like the firewall settings got messed up during the address changes. Any way to reset the firewall settings back to default?
|
|
0
link
|
bloxsupport1 Posts: 232
11/3/2017
|
cp /etc/sysconfig/iptables.default /etc/sysconfig/iptables then goto GUI and do apply changes
Thanks
netsteller wrote:
Is there a way to rebuild the firewall rules to a default setting? We backed up our current configuration using Freeblox. We restored the settings to new hardware in Freebox. The last thing we did was change the network settings for the internal LAN and external WAN network cards (different IP addresses). If we "activate" the firewall we cannot get traffic outbound on the WAN side. When we "deactivate" the firewall we can ping websites on the Internet. Sounds like the firewall settings got messed up during the address changes. Any way to reset the firewall settings back to default?
|
|
0
link
|