Girish Posts: 20
8/19/2017
|
Hello Support.
Is it possible to enable only G711 A and Mu Codecs for negotiation when placing out and disable other Codecs. I don't want transcoding but always use G711 if offered and offer G711.
Since no transcoding, the incoming offer has G711, G729 but SBC is sending out G729, G711 to the B party and one leg is on G729 and one leg is on G711 resulting in no audio.
If so how to enable / disbale the codes for offer....
|
|
0
link
|
bloxsupport1 Posts: 232
8/21/2017
|
Can you please send us the packet capture to support@blox.org
To take capture, login into the GUI and goto the tools-->Diagnostics-->Packet Capture Select the Interface as ANY and give the Internal and external ports used, select the timeout for some 90 sec and click on RUN, Then make a call and hangup and stop the capture and download it and send to us.
Thank you.
Girish wrote:
Hello Support.
Is it possible to enable only G711 A and Mu Codecs for negotiation when placing out and disable other Codecs. I don't want transcoding but always use G711 if offered and offer G711.
Since no transcoding, the incoming offer has G711, G729 but SBC is sending out G729, G711 to the B party and one leg is on G729 and one leg is on G711 resulting in no audio.
If so how to enable / disbale the codes for offer....
|
|
0
link
|