Get help with installing and configuring Blox SBC
single interface network/sip domain config
mkeys Posts: 6
5/10/2017
|
Given the topology:
[internet] <--> [ISP router/gateway] <--> [internal lan]
Where blox and private pbx are both on the same internal interface/network, is this an acceptable use case? The documentation seems to imply that two interfaces are required for config. If single nic is an acceptable config, would someone mind posting an example?
I also wanted to report that in the network configuration, where you must set NAT type as STUN or STATIC, if you choose STATIC and try to use a dynamic DNS hostname this will fail as it requires a IP address rather than FQDN.
Regards, Matt
|
|
0
link
|
Ryushin Posts: 5
5/10/2017
|
I set up a LibVirt virtual machine for mine. I tried to use one adapter and it was not possible to configure using the web UI. Also, trying to virtual interface also would not work. Ended up making another additional interface and giving it another internal IP.
So my config looks like this: ShoreTel 172.28.202.98 ---> 172.28.202.36(Internal)(Blox)(external)172.28.202.35 --> Fortigate Firewall to Flowroute
|
|
0
link
|
mkeys Posts: 6
5/11/2017
|
Ryushin wrote:
So my config looks like this: ShoreTel 172.28.202.98 ---> 172.28.202.36(Internal)(Blox)(external)172.28.202.35 --> Fortigate Firewall to Flowroute
Ah, thanks for that! So have you ran into any problems with that on the blox box or STP looping issues? How do you specify 202.35 as the egress nic towards the internet?
|
|
0
link
|